High Grinding Efficiency Cement Vertical Mill

• Customization: Available
• Type: Slag Vertical Mill
• Motor Type: AC Motor
• Model NO.: LGSM/LGM/LKM Slag Vertical Mill
• Motor Power: 500-5000 Kw
• Rotationl Speed: Slag Vertical Mill
• Application: Construction
• Materials: Slag Vertical Mill
• Condition: New
• Warranty: a Year
• After-sales Service: Twenty Four Hour Online
• Capacity Q(T/H): 55-230
• Standard Power P(Kw): 1250-4600
• Roller Number (N): 3-4
• Certification: ISO/CE
• Transport Package: Simple Packaging
• Trademark: ZTIC
• Origin: Luoyang, Henan
• Production Capacity: 500PCS/Year

Product Description

High Grinding Efficiency Cement Vertical Mill

 

Product Description

 

The cement vertical mill is a kind of mechanical equipment used for the grinding production of cement clinker. The following is a detailed introduction to the cement vertical mill:

Working principle

The cement vertical mill mainly consists of the main machine, feeder, classifier, blower, pipeline device, electrical control system, etc.

The motor drives the reducer to rotate the grinding disc. Under the action of centrifugal force, the material moves around the grinding disc and enters the space between the grinding roller and the grinding disc. Under the pressure of the grinding roller, it is crushed.

The ground powder is blown by the airflow of the blower to the classifier above the main unit for screening. The powder that meets the fineness requirements flows into the collector with the wind to become the finished product, and the purified airflow is discharged.

Structural composition

Grinding roller: The main component for crushing and grinding materials. It is usually equipped with two pairs and is designed at an incline to increase the contact area and improve the grinding efficiency.

Grinding disc: Fixed on the output shaft of the reducer, the material is crushed by the grinding rollers on it.

Separator: An important component that determines the fineness of the finished product, it is composed of a variable-speed transmission device, rotor, etc., and its working principle is similar to that of a powder separator.

Hydraulic tensioning system: It provides grinding pressure for the grinding rollers and is composed of a high-pressure oil station, hydraulic cylinders, etc. It is the key to the stable operation of the vertical mill.

Technical characteristics

High grinding efficiency: It adopts the principle of material bed grinding, which saves 20% to 30% energy compared with ball mills.

Strong drying capacity: It can dry materials with a moisture content as high as 15% to 20%.

Stable product quality: Stable chemical composition and uniform particle size distribution are conducive to calcination.

Low wear and high utilization rate: There is no direct metal contact between the grinding roller and the grinding disc, resulting in low wear and low metal consumption.

Easy to operate and maintain: Equipped with an automatic control system, it can be remotely controlled, and the maintenance workload is small.

 

Product Parameters

 

Model	Grinding diameter d(mm)	Roll diameter d(mm)	Roller number (n)	Standard power P(kw)	capacity Q(t/h)
LKCM30.31	3,000	1,600	3	1250	55~60
LKCM32.31	3,200	1,700	3	1600	65~80
LKCM35.41	3,500	1,800	4	1800	85~100
LKCM40.41	4,000	1,900	4	2500	115~125
LKCM43.41	4,300	2,120	4	3000	135~145
LKCM46.41	4,600	2,240	4	3350	150~160
LKCM48.41	4,800	2,240	4	3550	170~180
LKCM50.41	5,000	2,360	4	3900	190~200
LKCM53.41	5,300	2,500	4	4600	210~230
LKCM56.61	5,600	2,500

 

 

Parameters of Raw Vertical Mill:

Raw Vertical Mill Specifications

Model	Grinding diameter D	Roll diameter D	Roller number	Standard power P	capacity Q
	(mm)	(mm)	(n)	(kW)	(t/h)
LKMR22.30	2200	1400	3	550	70
LKMR26.30	2600	1600	3	790	100
LKMR28.30	2800	1750	3	900	115
LKMR30.30	3000	1700	3	1000	120
LKMR32.30	3200	1500	3	1400	160
LKMR34.30	3400	1500	3	1600	180
LKMR36.41	3600	1600	4	1800	200
LKMR38.41	3800	1700	4	1900	230
LKMR40.41	4000	1800	4	2240	260
LKMR43.41	4300	1900	4	2500	310
LKMR46.41	4600	2060	4	3150	350
LKMR48.41	4800	2240	4	3350	390
LKMR50.41	5000	2360	4	3500	420
LKMR53.41	5300	2500	4	3800	470
LKMR56.41	5600	2600	4	4500	540
LKMR59.61	5900	2600	6	5000	610
LKMR63.61	6300	2700	6	6000	720

Note: mill spectral pattern benchmark

 

Coal Vertical Mill

Application Industry

Cement Plant, Steel Mill, Power Plant

Output

5~70 t/h

Final Product Fineness

80 μmR 3%

Power Consumption of System

18~22 kWh/t

Description of Coal Vertical Mill: 
This vertical coal mill is typically designed to process materials in medium hardness, like soft coal or bituminous coal, and it is mainly used in positive pressure pulverizing system of soft coal. It is widely used in electricity field, metallurgy sector, building material industry, chemical industry

It has features of low energy consumption, small occupation area, easy operation, low noises, reliable performance, big crushing ratio, long-lifespan grinding components, strong applicability, and so on.
 

Technical Parameters of Vertical Coal Mill:

Coal Vertical Mill Specifications

Model	Grinding diameter	Roll diameter	Roller number	Standard power	capacity
	D(mm)	D(mm)	(n)	P(kW)	(t/h)
LKMC12.20	1200	900	2	110	5
LKMC16.20	1600	1000	2	250	12
LKMC18.20	1800	1120	2	330	18
LKMC20.30	2000	1250	3	430	20
LKMC22.30	2200	1400	3	590	30
LKMC23.30	2300	1450	3	640	35
LKMC26.30	2600	1600	3	810	44
LKMC28.30	2800	1750	3	1000	55
LKMC30.30	3000	1900	3	1250	65
LKMC35.30	3500	1900	3	1400	70

Note: Mill spectral pattern benchmark

 

Slag Vertical Mill

Application Industry

Cement Plant, Grinding Station, Steel Mill

Output

50~180 t/h

Specific Surface

4200~4500 cm²/g

Power Consumption of System

≤43 kWh/t

Description of Vertical Slag Mill: 
Our vertical slag mill is typically designed to deal with industrial waste residues generated by the blast-furnace ironmaking. Due to its high physical and chemical activity, and potential hydraulicity, the slag has been widely as admixture matters in the cement industry. And the slag can replace the cement in the concrete to improve the quality and durability of the concrete.

 Here in ZTIC  Co., Ltd, our vertical slag mill has features of high grinding efficiency, strong dry capacity, easy adjustment, low noises, low electricity consumption, simple process flow, little abrasion, and so on.

 

Slag Vertical Mill Specifications

Model	Grinding diameter	Roll diameter	Roller number	power	Scapacity
	(mm)	(mm)	(n)	(kW)	(t/h)
LKMS33.31	3200	1700	3	1600	50
LKMS35.41	3500	1800	4	1800	60
LKMS40.41	4000	1900	4	2240	70
LKMS43.41	4300	2120	4	2800	90
LKMS46.41	4600	2240	4	3150	105
LKMS48.41	4800	2240	4	3550	125
LKMS50.41	5000	2360	4	3800	140
LKMS53.41	5300	2500	4	4200	160
LKMS56.61	5600	2500	6	5000	180

Note: mill spectral pattern benchmark

(1) Material medium friction (MFs)=0.9~1.0;

(2) Material moisture max 15%;

(3) Refined powder granularity 4200~4500 cm²/g;

(4) Refined powder moisture 0.5~1.0%;

 (5) The concrete mill installed power and technology parameter will be adjusted appropritely basing on the actual material property and requirements of owner;

Company Profile

 

After Sales Service

ZTIC Heavy Industries is your business partner in the After Market.
ZTIC  able to provide:
1.    ENGINEERED SPARES -  DESIGN AND MANUFACTURING
2.    LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3.    HUGE MACHINE SHOP CAPABILITIES
4.    TRAINING PROGRAMMES
5.    PREVENTATIVE MAINTENANCE PROGRAMS
6.    PREVETATIVE MAINTENANCE SERVICES
7.    COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.
 

Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
     2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
     3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
 
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
 
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
 
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
 
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.