140-3500 Tph Hydraulic Gyratory Crusher Used in Granite/Gravel/Basalt

• Customization: Available
• Type: Gyratory Crusher
• Motor Type: AC Motor
• Model NO.: Hydraulic Gyratory Crusher
• Motor Power: 160kw
• Application: Water Conservancy
• Materials: Fine Sandstone
• Outlet Size: 200-300mm
• Inlet Size: 900×1200mm
• Condition: New
• Warranty: a Year
• After-sales Service: Twenty Four Hour Online
• Production T/H: 140-3500 Tph
• Feeding Size Mm: 500-1600
• Output Size Mm: 60-230
• Power Kw: 130-310
• Industries: Minerals, Cement, and Aggregate
• Transport Package: Simple Packaging
• Specification: JR128-10
• Trademark: ZTIC
• Origin: Luoyang, Henan
• Production Capacity: 500PCS/Year

Product Description

140-3500 Tph Hydraulic Gyratory Crusher Used in Granite/Gravel/Basalt
 

Product Description

1.Hydraulic gyratory crusher:PXZ/PXQ

ZTIC manufacture a range or Primary Gyratory Crushers to suit both the Mining and Aggregate Industries with an installed based operating since 1997.
 Our experience with Mining Industries (Minerals, Cement, and Aggregate) has resulted in a complete line of Gyratory Crushers to satisfy the requirements of a wide variety of our customers' applications.
The basic concept behind the Gyratory Crusher remains the same as it did during its inception, but the machine is entirely updated to address today's advanced technology, safety concerns, and operation schedules.

Our focus is on continually improving the design of our equipment to better serve our customers.

2.ZTIC offers custom engineered solutions as an answer to our customers' unique requests.
Features & BenefitsBar Type Spider for less maintenanceCountershaft Bearings automatically adjust to temperature fluctuations and wear, requiring minimal maintenanceMain Shaft Assembly designed to assure securityHydraulic Adjustment & Accumulator with Relief Valves designed to extend component lifeForged alloy gears and carburized pinions engineered to prevent tooth failure and ensure long service lifeBronze Busings for long lifeHigh Capacity Lubrication minimizing the risk of burned bushingsCrushing Chamber optimized for each application to ensure even wear and high throughputDrive Protection Coupling reduces shock loading of drive compnents druing tramp eventsAutomation Systems are avaialable on all

Since the gyratory crushes on full cycle, it has a much higher capacity than a jaw crusher of the same gape, and is usually favoured in plants handling very large throughputs. Large gyratory crushers often dispense with expensive feeding mechanisms and are often fed direct from trucks. They can be operated satisfactorily with the head buried in feed. Choked crushing is encouraged to some extent so that the rock-to-rock crushing produced in the primaries reduces the rock-to-steel crushing required in the secondary crushing stage, thus reducing steel consumption. Operating crushers under choke feeding conditions gives more even mantle wear and longer life. Gyratory crushers are mostly used in surface crushing plants.

3.Definition of Gyratory Crusher:

A gyratory crusher is similar in basic concept to a jaw crusher, consisting of a concave surface and a conical head; both surfaces are typically lined with manganese steel surfaces. The inner cone has a slight circular movement, but does not rotate; the movement is generated by an eccentric arrangement. As with the jaw crusher, material travels downward between the two surfaces being progressively crushed until it is small enough to fall out through the gap between the two surfaces.

4.Working principle of Gyratory Crusher :

The main shaft of the crusher is radially guided in the rolling contact bushing in the upper main shaft bearing and in the inner eccentric bushing in the lower eccentric bearing. The thrust bearing assembly arranged on the piston of the hydraulic cylinder ensures the axial support of the main shaft. 
The rotation of the drive motor is transmitted via the transmission gear to the eccentric bushing in the eccentric bearing . This rotating eccentric bushing is responsible for generating the wobbling motion of the main shaft -this wobbling motion is characteristic of cone crushers. 
Consequently, the crushing gap between the stationary concaves in the crusher housing and the wobbling crushing cone changes continuously. 
The feed material that enters the crushing chamber from the top is continuously crushed between the crushing tools as it falls by gravitation until it exits the crushing chamber at the bottom .
The crushing gap is adjusted by hydraulically lifting or lowering the main shaft.

This hydraulic main shaft adjustment is particularly used with abrasive feed material and frequent corrections of gap setting.
It also serves as overload protection when uncrushable foreign matter finds its way into the crushing chamber.
Easy restart under load in an emergency due to hydraulic main shaft lifting and lowering.
Main shaft"jumping"under adverse crushing conditions is avoided by a pressurized hydraulic system ensuring permanent contact of the individual thrust bearing discs.
The use of a bevel gear set with cyclo-palloid toothing allows the installation of drive motors with higher ratings, if required.

Product Parameters

5.PXZ Gyratory Crushers Technical data

Model	feeding size  MM	output size  MM	Max.feeding size  MM	Width of discharge opening  MM	Production T/H	Diameter of crushing cone  MM	Main motor
							Model	power kW	speed R/Min	Voltage V
PXZ  0506	500	60	420	60~75	140~170	1200	JR128-10	130	585	380
PXZ  0710	700	100	580	100~130	310~400	1400	JR136-8 JR128-8	145 155	730	3000 380
PXZ  0909	900	90	750	90~120	380~510	1650	JR137-8	210	735	380
PXZ  0913	900	130	750	130~160	625~770	1650	JR137-8	210	735	380
PXZ  0917	900	170	750	170~190	815~910	1650	JR137-8	210	735	380
PXZ  1216	1200	160	1000	160~190	1250~1480	2000	JRQ158-10	310	590	6000
PXZ  1221	1200	210	1000	210~230	1560~1720	2000	JRQ158-10	310	590	6000
PXZ  1417	1400	170	1200	170~200	1750~2060	2200	JRQ1510-10	430 400	590	3000 6000
PXZ  1422	1400	220	1200	210~230	2160~2370	2200	JRQ1510-10	430 400	590	3000 6000
PXZ  1618	1600	180	1350	180~210	2400~2800	2500	JRQ158-10	310	590	6000
PXZ  1623	1600	230	1350	210~240	2800~3200	2500	JRQ158-10	310	590	6000

PXQ Gyratory Crushers Technical data

Model	feeding size MM	output size MM	Max.feeding size  MM	Width of discharge opening MM	Production T/H	Diameter of crushing cone  MM	Main motor
							Model	power kW	speed R/Min	Voltage V
PXQ  0710	700	100	580	100~120	200~240	1200	JR128-10	130	585	380
PXQ  0913	900	130	750	130~150	350~400	1400	JR136-8 JR128-8	145 155	730	3000 380
PXQ  1215	1200	150	1000	150~170	720~815	1650	JR137-8	210	735	380

 

Company Profile

 

 Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
     2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
     3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.

Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.

Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.

Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.

Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.

After Sales Service

ZTIC Heavy Industries is your business partner in the After Market.
ZTIC  able to provide:
1.    ENGINEERED SPARES -  DESIGN AND MANUFACTURING
2.    LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3.    HUGE MACHINE SHOP CAPABILITIES
4.    TRAINING PROGRAMMES
5.    PREVENTATIVE MAINTENANCE PROGRAMS
6.    PREVETATIVE MAINTENANCE SERVICES
7.    COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.