| Customization: | Available |
|---|---|
| Casting Method: | Special Casting |
| Casting Form Material: | Metal |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GENERAL DESCRIPTION
Jaw crusher jaw is also called jaw head and jaw back. The jaw plate is also called the toothed plate, which is the key part of the jaw crusher. A jaw plate usually consists of two parts that move jaw plate and fixed jaw plate, jaw plate is the main components of jaw crusher, a movable jaw plate, a fixed jaw plate, according to the crusher machine models of different, there are many types of size, generally uses the high manganese steel.
High manganese steel jaw plate
High manganese steel is a jaw crusher jaw plate of traditional material, it has good toughness, but also has good ability of deformation hardening. But due to the current jaw crushing machine structure is not very reasonable, the moving and fixed jaw plate between the angle is too large, easy to cause the abrasive sliding and deformation hardening of high manganese steel is not sufficient, jaw plate, the lower surface hardness, abrasive cutting short amount is larger, jaw plate wear faster.
Steel jaw plate
Due to the low initial hardness of high manganese steel, yield strength low, under non severe impact conditions, the hardening is not sufficient, rheological and easy to cut. In order to improve the service life of the jaw plate, the development of medium manganese steel.
High chromium cast iron and high manganese steel composite jaw plate
High chromium cast iron, although the excellent wear-resistant material, but due to the poor toughness by material impact or extrusion, will direct fragmentation or deformation of a few times on spalling occurred. Therefore, a high chromium cast iron jaw plate does not necessarily achieve the good effect. In recent years, the high chromium cast iron insert casting bonding or on the high manganese steel jaw plate, composed of composite jaw plate, manganese 13 CR 2 (mn13cr2), 18 manganese chromium 2 Mn18Cr2 and fully play the high toughness of high chromium cast iron with high wear resistance and high manganese steel, so that the service life of the jaw plate can be greatly improved.
Low alloy cast steel jaw plate
Medium carbon low alloy cast steel is widely used as a kind of wear resistant material, mainly because of its high hardness and toughness combined, can resist material cutting action and material to repeated extrusion caused by fatigue spalling, which showed good resistance to abrasion. At the same time, medium carbon low alloy cast steel can be adjusted by the composition and heat treatment process, so that the hardness and toughness can be changed in a large range to meet the requirements of different working conditions.
Zhengzhou Yusheng Foundry Co., Ltd. respectively with Mn13, mn13cr2, Mn18, Mn18Cr2 (which is the super high manganese) or according to the working condition of special ingredients, with high performance and new type composite casting, increase of more than 3 times than the ordinary life time of the jaw plate, breaking the has been new material wear-resistant castings only ratio, high manganese steel castings, life most can only increase 1.5 times of the record. The product from the transformation of scientific and technological achievements into a new composite jaw plate, new composite rolling mortar wall has begun by mining, metallurgy and other conditions of the poor condition of the industry recognition.
| 1. Jaw crusher spares parts |
| Movable jaw plate,Fixed jaw plate,Lining plate,Grid plate,Spring seat, Adjusting seat,Tension rod, JM Series - JM806, JM907, JM1107, JM1108, JM1208, JM1211, JM1312, JM1511, JM1513 CJ Series - CJ408,CJ409,CJ411,CJ412,CJ612,CJ613,CJ615,CJ815 CH Series - CH430(H3000,H3800),CH440(H4000,H4800) CH660(H6000 ,H6800)CH880(H8000 ,H8800) UJ Series - UJ310, UJ440i, UJ440E, UJ540, UJ640 CM Range - CM1208i, CM1208F, CM1211, CM1511 |
| 2.Impact crusher spares parts |
| Blow Bars,Impact Plates,Liner Plates, Bearing Houses,Replacement Rotors, Bearings, Springs,Grinding Paths CV series - CV215 | CV216 | CV217 | CV218 | CV228 | CV229 |
| 3. Cone Crusher Spares parts |
| Concave, Mantle, Mill liners, Points materials plate, locknut Hydrocone® CH Series - CH420, QH330, CH430, CH440, CH660, CH780, CH880 Hydrocone® 1800 Series - H2800, H3800, H4800, H6800, H7800, H8800 Hydrocone® 1000 Series - H2000, H3000, H4000, H6000, H7000, H8000 Superior® CS Series - CS420, CS430, CS440, CS660 Superior® 1800 Series - S2800,S3800, S4800, S6800 Superior® 1000 Series - S2000, S3000, S4000, S6000 |
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.
){kind=link}