| Customization: | Available |
|---|---|
| After-sales Service: | Twenty Four Hour Online |
| Warranty: | a Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Engine
• Low speed engine and E-fan make fuel consumption better
• 3 stage air cleaner with 93% efficiency pre cleaner reduce earlier wearing, high efficiency fuel filter make engine work in good condition
• C a t technology damping mount reduce vibration failure
Efficient Hydraulic System
• Excellence modulation performance implement valve with mechanical control, make operation more accurately
• Full hydraulic load sensing steering and flow shared system save fuel and raise productivity, hydraulic cycle time is only 9.3s
• Word class pump and C a t technology lines routing deliver better reliability
Operator Station
• Mould formed cab with all trims design and more vents with HVAC make operator feel better
• First class premium seat with suspension adjustable, arm rest and safety belt. Up-down, forward and reverse adjustable
• C a t technology damping mount reduce vibration failure
• Slide window, fresh air inlet system make environment better
Drivetrain
• SEM made in house counter shaft transmission reliable and high efficiency, core components reliable improvement
• One stage and 3 element torque converter deliver higher efficiency
• 1st gear higher draw bar and 2nd gear faster speed make penetration easier and move material faster
Cooling System
• High performance aluminum cooling package suitable for most of severe applications
• Oil cooler and radiator parallel design can balance heat load inside and suitable diversity applications
• Damping design reduce vibration failure
Solid Structure
• Validated by C a t technology FEA( Finite Element Analysis) and OMSA(On Machine Stress Analysis)
• Middle articulation frame less work space needed and reduce tire resistance
• Large spread hitch design in acticulation section can stand more load
Serviceability
• Quick pressure test ports on HYD and brake lines make diagnose easier
• Large wing hood door make service easier, approach to air cleaner, fuel filter and oil filter
• Large spread hitch design in acticulation section make operator easier to approach
Safety
• Slope switch make machine approach to hopper and pile in slope safety and easier
• High decibel Beacon and backup alarm make person around easy to attention
• 3 stage alarm system on panel
• 3 touch points entering and exiting cab make operator more safe
Machine Applications
• Landscaping, building, sewer/water in, local construction
• Ready mix cement/concrete products, quarry/stone, clay, recycled aggregate, sand and gravel
• Highway, street, tunnel, airport, residential commercial
WJ-3 diesel engine underground wheel loader supply list
| No. | Item | Spec | Original |
| 1 | Engine | BF6M1013EC | Germany DEUTZ |
| 2 | drive axle | 16D2149 | DANA |
| 3 | bivariant | C273/32366 series | DANA |
| 4 | operating valve | imported | |
| 5 | Working pilot valve | ||
| 6 | conversion valve | Imported | |
| 5 | Steering pilot valve | ||
| 6 | prefill valve | 06-463-020 |
MICO |
| 7 | The foot brake valve | 03-460-433 | MICO |
| 8 | The gas cylinder etc. |
Williams | |
| 9 | Working pump | PGP330C578WEAB17-7 | PARKER |
| 10 | steering pump | PGP517A0330AD1H3NB1B1D6D5 | PARKER |
| 11 | pressure switch | PMN150C/110 | Geely da |
| 12 | energy accumulator 1 |
|
|
| 13 | energy accumulator 2 | NXQ-0.63/10 | |
| 14 | solenoid valve | 4WE10JB20/AG24Z4(G67/01) | Huade |
| 15 | high pressure filter | GU-H63*20 | Liming |
| 16 | sequence valve | DZ6DP1-5X75YM(G502/01) | Huade |
| 17 | Oil suction filter | WU-400*100F-J | Liming |
| 18 | return oil filter | GP-A500*20Q2Y | Liming |
| 19 | Tyre | 17.5-25 | Fengshen |
| 20 | purifier | ||
Main technical data
Bucket volume 3.0m3
Rated load 6000kg
The length of the machine is 8600 mm
Machine width 2100 mm
Machine height (including protection ceiling) 2120 mm
Bucket full load boom lifting time 6.2s
Bucket full load boom tipping time 4.2s
Bucket full load forward time 8s
Maximum lifting height 4390mm
The maximum unloading height is 1325mm
Minimum unloading distance 1540mm
Uninstall Angle of 40 DHS
The wheelbase 3150 mm
Wheelbase 1400 mm
Minimum ground clearance 315mm
Angle of departure of 14 DHS
Rear axle swing Angle ±8º
2. Machine weight and load
The operating weight of the machine is 14500 kg
The heavy-duty weight of the machine is 20050 kg
speed
1 4.7 km/h
2 9.4 km/h
3 18.4 km/h
The engine
Internal combustion engine BF6M1013EC (DEUTZ)
Power 165 kw / 2300 RMP
The torque of 847 n / 1400 RMP
Power system
Torque converter DANA C273
Transmission DANA R32366
16 d2149 bridge DANA
Climbing capacity ≥14º
Maximum traction is 119KN
Maximum shovel capacity 111KN
Electrical system
Working voltage DC24V
Steering system
Steering Angle - 42 DHS
Minimum turning radius 3580 (inside)
6300 (outside)
Product Advantage
Reliability: Sturdy frame design for heavy duty, proved made in house transmission make usage life longer
Productivity: 1st with bigger force and 2nd gear with fast speed conjoint useage deliver high productivity. Auto to ready function save your time for operation
Fuel consumption: Low speed engine, E-fan and flow shared hydraulic system make lower fuel consumption
Comfortable: Good visibility cab and low noise design with first class premium 5 directions adjustable seat make comfortable operation
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time?
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms?
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
){kind=link}