| Customization: | Available |
|---|---|
| After-sales Service: | on Line 24 Hours |
| Warranty: | One Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
In mine equipment, the ball mill is one of the necessary equipment, and the ball mill is one of the main working parts of the ball mill. Ball mill barrel in the work, in addition to receiving the static load of the grinding media, but also by the impact of grinding media, and the cylinder is a rotating, so the stress generated on the cylinder is changed. The metal material of the cylinder body is of high strength and good plasticity, and can be welded with common structural steel Q235, and the cylinder of the large mill is made of 16Mn steel.
Every bin on the cylinder should have a grinding door (also known as Kong Men). Grinding door is convenient for personnel to enter, inserts for lining board, partition board, filled or emptied grinding media, and stop grinding mill inspection operation. The position of each bin should be staggered on both sides of the cylinder, and the centrifugal force generated by the gravity of the grinding gate. In order to ensure the strength of the cylinder, the shape of the grinding door is generally round, oval or round shape, so as to avoid the crack caused by the stress concentration and cause the damage of the cylinder.
Mill operation and stopped for a long time when the length of the cylinder is not the same, this is due to the different barrel temperature caused by thermal expansion and contraction caused by. In order to ensure that the gear meshing normally, near the mill transmission device of unloading terminals are not allowed to have any axial movement, therefore, to be in the feed end set to adapt to the axial thermal deformation of the structure: A is reserved clearance between shaft neck of hollow shaft shoulder and bearing; another is the bearing seat and between the floor horizontal mounting a plurality of steel and, when heat expansion and cold contraction of a cylinder body, feed end of main bearing base along the roller moving.
Cement Ball Mill & Cement grinding mill Technical parameters
| NO | Model (m) | Production capacity t/h | Speed r/min | Feed in size mm |
Medium load T |
Effective volume | Main motor | Size | Weight (T) | |||
| Power kw | Voltage V | L | W | H | ||||||||
| 1 | Φ2.2×6.5 | 13-14 | 22 | <25 | 31 | 21.4 | 380 | 6000 | 12385 | 5390 | 4210 | 53 |
| 2 | Φ2.2×11 | 15-16 | 21 | <25 | 50 | 36 | 630 | 6000 | 21559 | 4540 | 3520 | 109 |
| 3 | Φ2.2×13 | 16-18 | 21.5 | <25 | 60 | 43 | 630 | 6000 | 26079 | 4540 | 3520 | 114.2 |
| 4 | Φ2.4×8 | 15 | 20.8 | <25 | 45 | 30 | 560 | 6000 | 17215 | 5564 | 4540 | 82.53 |
| 5 | Φ2.4×13 | 20-23 | 19 | <25 | 65 | 51.7 | 800 | 6000 | 27580 | 4540 | 3620 | 138 |
| 6 | Φ2.6×13 | 30-32 | 19.6 | <25 | 80 | 60 | 1000 | 6000 | 20883 | 7740 | 5670 | 144.5 |
| 7 | Φ3×9 | 28-32 | 17.8 | <25 | 70-80 | 55 | 1000 | 6000 | 23568 | 4760 | 3670 | 138.7 |
| 8 | Φ3×11 | 36-40 | 18.9 | <25 | 100 | 69 | 1250 | 6000 | 27610 | 5720 | 4080 | 181.9 |
| 9 | Φ3×11 | 36 | 17.69 | <25 | 100 | 69 | 1250 | 6000 | 24567 | 7510 | 5968 | 156.5 |
| 10 | Φ3.2×11 | 40-45 | 17.4 | <15 | 90-100 | 78 | 1250 | 6000 | 28000 | 5720 | 3672 | 180 |
| 11 | Φ3.5×9.5 | 40 | 18 | <20 | 115 | 76.4 | 1400 | 6000 | 29717 | 5250 | 5000 | 194.4 |
| 12 | Φ3.5×11 | 45 | 17.2 | <15 | 116 | 78.5 | 1600 | 6000 | 28454 | 5350 | 5600 | 271.64 |
| 13 | Φ3.6×8.5 | 60 | 16.5 | <20 | 102 | 86 | 2500 | 6000 | 19693 | 4141 | 5404.5 | 233.3* |
| 14 | Φ3.8×9 | 70-80 | 16.5 | <20 | 130 | 94 | 2000 | 6000 | 28521 | 5550 | 5600 | 255.2 |
| 15 | Φ3.8×12.5 | 55 | 16.4 | <25 | 167 | 123.5 | 2500 | 6000 | 17419 | 10745 | 8204 | 301.4 |
| 16 | Φ3.8×13 | 60 | 16.3 | <25 | 173 | 128 | 2500 | 6000 | 19693* | 4141* | 5404.5 | 223.3* |
| 17 | Φ4.2×11 | 120 | 15.75 | ≤3 80%pass | 182 | 134.5 | 2800 | 18500 | 4400 | 6500 | 256** | |
| 18 | Φ4.2×11.5 | 130 | 15.99 | ≤3 80%pass | 199 | 138 | 2800 | 10000 | 18002 | 8962 | 7520 | 219** |
| 19 | Φ4.2×11.5 | 130 | 16 | ≤3 80%pass | 199 | 138 | 2800 | 17259 | 4960 | 5600 | 220** | |
| 20 | Φ4.2×12.5 | 85 | 16 | ≤25 90% | 210 | 151 | 3150 | 18400 | 4960 | 8640 | 251** | |
| 21 | Φ4.2×12.5 | 145 | 16 | ≤3 80% | 210 | 151 | 3150 | 18400 | 4960 | 8640 | 242** | |
| 22 | Φ4.2×13 | 75 | 15.6 | ≤25 90% | 209 | 157 | 3150 | 174450 | 4880 | 8000 | 255** | |
| 23 | Φ4.2×13 | 150 | 15.6 | ≤3 80% | 209 | 157 | 3150 | 17445 | 4880 | 8000 | 256** | |
| 24 | Φ4.2×13.5 | 80-85 | 15.8 | ≤25 90% | 230 | 164 | 3550 | 17744 | 6700 | 6010 | 256** | |
| 25 | Φ4.2×14 | 95 | 15.6 | ≤25 90% | 252 | 169 | 3550 | 19055 | 20490 | 23200 | 220** | |
| 26 | Φ4.2×14.5 | 95 | 15.8 | ≤25 80% | 250 | 178 | 4000 | 5050 | 6700 | 11054 | 278** | |
| 27 | Φ4.6×14 | 95-110 | 15 | 285 | 185 | 4200 | 6000 | 23200 | 11054 | 6370 | 310** | |
ZTIC is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.
){kind=link}