| Customization: | Available |
|---|---|
| Type: | Flotation Separator |
| Weight: | 1T |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Flotation machines are mainly used for the separation of non-ferrous metals such as copper, zinc, lead, nickel and gold, and can also be used for the rough and fine selection of ferrous metals and non-metals.
Structural composition
The flotation machine is mainly composed of a slurry receiving tank, a stirring device, an aeration device, a mineralized foam discharge device, etc.
When the flotation machine is in operation, as the impeller rotates, the pulp in the tank is drawn from the periphery through the bottom of the tank from the lower end of the impeller to the space between the impeller blades. Meanwhile, the low-pressure air fed in by the blower also enters through the hollow shaft and the air distributor of the impeller. After the pulp and air are fully mixed between the blades, they are pushed obliquely upward from the periphery of the upper half of the impeller. After being stabilized and directed by the stator, they enter the entire trough. The bubbles rise to the foam stabilization zone. After the enrichment process, the foam overflows by gravity from the overflow weir and enters the foam trough. Another part of the pulp flows towards the lower part of the impeller. After being stirred by the impeller, it is re-mixed to form mineralized bubbles. The remaining pulp flows to the next tank until it eventually becomes tailings.
SF Flotation Machine Technical data:
Model |
SF0.37 |
SF0.7 |
SF1.2 |
SF2.8 |
SF4 |
SF8 |
|
Trough capacity(m³) |
0.37 |
0.7 |
1.2 |
2.8 |
4 |
8 |
|
Impeller diameter(mm) |
300 |
350 |
450 |
550 |
650 |
T60 |
|
Production capacity (m³/min) |
0.2-0.4 |
0.3-0.9 |
0.6-1.2 |
1.5-3.5 |
0.5-4 |
4-8 |
|
Impeller rotation speed (r/min) |
352 |
400 |
312 |
268 |
238 |
191 |
|
Motor |
Model |
Y90L-4 |
Y100L2-4 |
Y132M2-6 |
Y160L-6 |
Y180L-6 |
Y250M-8 |
Y90S-4 |
Y90S-4 |
Y90S-4 |
Y90S-4 |
Y90L-4 |
Y100L-6 |
||
Power(kw) |
1.5 |
3 |
5.5 |
11 |
15 |
30 |
|
1.1 |
1.1 |
1.1 |
1.1 |
1.5 |
1.5 |
||
Dimensions(mm) |
700×700×750 |
900×820×950 |
1100×1100×1100 |
1700×1600×1150 |
1850×2050×1200 |
2200×2900×1400 |
|
Single trough weight(kg) |
468 |
600 |
1373 |
2338 |
2660 |
4486 |
|
Model |
XJM-1 | XJM-2 | XJM-3 | XJM-4 | XJM-8 | XJM-16 | XJM-24 | XJM-38 | |
| Chute dimensions | Length (mm) | 1000 | 1300 | 1600 | 1800 | 2200 | 2800 | 3100 | 3600 |
| Width (mm) | 1000 | 1300 | 1600 | 1800 | 2200 | 2800 | 3100 | 3600 | |
| Height (mm) | 1100 | 1250 | 1400 | 1500 | 1950 | 2400 | 10819 | 3400 | |
| Single effective weight (kg) | 1154 | 1659 | 2259 | 2669 | 3868 | 6520 | 8000 | 16790 | |
| Effective cubage (m³) | 1 | 2 | 3 | 4 | 8 | 16 | 24 | 38 | |
| Production capacity(calculated by slurry volume) (m³/min) | 0.2-1 | 0.4-2 | 0.6-3 | 1.2-4 | 3-8 | 4-16 | 4-24 | 10-38 | |
| Main shaft motor | Model | Y132M2-6 | Y160M-6 | Y160L-6 | Y180L-6 | Y200L2-6 | Y280S-8 | Y280S-8 | Y280S-6 |
| Power (kw) | 5.5 | 7.5 | 11 | 15 | 22 | 37 | 37 | 45 | |
| Impeller | |||||||||
| Rotation speed (r/min) | 960 | 970 | 970 | 970 | 970 | 740 | 740 | 980 | |
| Diameter (mm) | 400 | 460 | 540 | 620 | 720 | 860 | 950 | - | |
| Height (mm) | 155 | 175 | 207 | 247 | 321 | 349 | - | - | |
| Rotation speed (r/min) | 358 | 331 | 266 | 215 | 185 | 160 | 153 | - | |
| Circular velocity (m/s) | 7.5 | 7.5 | 7.5 | 7 | 6.97 | 7.6 | 7.6 | 7.4 | |
| Loam board motor | Model | Y90S-4 | Y90S-4 | Y90L-4 | Y90L-4 | Y90L-4 | Y90L-4 | Y90L-4 | Y90L-4 |
| Power (kw) | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Rotation speed (r/min) | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | |
| Loam board | Rotation speed (r/min) | 18 | 18 | 16 | 16 | 16 | 16 | 16 | 16 |
| Diameter (mm) | 500 | 500 | 580 | 600 | 600 | 700 | 700 | 700 | |
| Wind pressure of fan (kpa) | ≥12.6 | ≥14.7 | ≥19.8 | ≥19.8 | ≥21.6 | ≥25.5 | ≥30.4 | ≥34.3 | |
){kind=link}