| Customization: | Available |
|---|---|
| Type: | Jaw Crusher |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The jaw crusher series products are widely used in various industries such as mining, metallurgy, construction, highways, railways, water conservancy and chemical engineering. It features a large crushing ratio, uniform product particle size, reasonable structure, reliable operation, convenient maintenance and economical operating costs. It can crush various materials with a compressive strength not exceeding 320 megapascals.
This machine is mainly composed of a frame, movable jaw, eccentric shaft, jaw plate, toggle plate and other components. The motor rotates the eccentric shaft through a V-belt, causing the movable jaw to move along the adjusted track, thereby crushing the materials in the crushing chamber.
The frame is a single integral cast steel structure. The front wall of the frame is equipped with fixed jaw plates fastened with wedge bolts. On the side walls of the frame on the left and right sides of the crushing cavity, side guard plates are installed to prevent the wear of the side walls of the frame.
The movable jaw is a formed cast steel part. The front side is equipped with an movable jaw plate. Its upper part is suspended on the frame by an eccentric shaft and roller bearings, and its lower part is supported on the toggle plate and in rolling contact with it. Flywheels and pulleys are installed at both ends of the eccentric shaft.
The other end of the toggle plate is supported on the adjusting seat and comes into rolling contact with the bearing. Besides supporting the moving jaw, the toggle plate also plays a protective role when external materials that cannot be crushed enter the crushing chamber and the load of this machine suddenly increases, that is, it breaks rapidly itself to protect other components from damage.
The 5 adjustment seats are installed in the sliding grooves on both sides of the frame and are closely attached to the adjustment wedge blocks. When the discharge port needs to be adjusted, turn the nut to the right with a wrench. The adjustment wedge blocks will immediately rise, and the adjustment seats will move forward accordingly. The discharge port will change from large to small, and vice versa.
1. The crushing cavity is deep and has no dead zones, which enhances the feeding capacity and output.
2. It has a large crushing ratio and uniform product particle size.
3. The gasket type discharge opening adjustment device is reliable and convenient, with a wide adjustment range, which increases the flexibility of the equipment.
4. The lubrication system is safe and reliable, with convenient component replacement and low maintenance workload.
5. Simple structure, reliable operation and low operating costs.
6. Equipment energy conservation: Single machine energy conservation is 15% to 30%, and system energy conservation is more than double.
7. The adjustment range of the discharge port is wide, which can meet the requirements of different users.
8. Low noise and little dust.
Model |
Feed opening (mm) |
Max.feeding size (mm) |
Adjusting range of discharge opening (mm) |
Processing capacity (t/h) |
Rotation speed of eccentric shaft (r/min) |
Motor power (kw) |
Total weight (t) |
Dimensions (L×W×H) (mm) |
PE-150×250 |
150×250 | 125 | 10-40 | 1-3 | 250 | 5.5 | 0.8 | 720×660×850 |
| PE-200×300 | 200×300 | 180 | 15-50 | 2-6 | 260 | 7.5 | 1.2 | 910×750×990 |
| PE-200×350 | 200×350 | 180 | 18-70 | 3-10 | 260 | 11 | 1.5 | 1000×870×990 |
| PE-250×400 | 250×400 | 210 | 20-60 | 5-20 | 300 | 15 | 2.8 | 1300×1090×1270 |
| PE-400×600 | 400×600 | 340 | 40-100 | 16-60 | 275 | 30 | 7 | 1730×1730×1630 |
| PE-500×750 | 500×750 | 425 | 50-100 | 40-110 | 275 | 55 | 12 | 1980×2080×1870 |
| PE-600×750 | 600×750 | 500 | 150-200 | 80-240 | 275 | 55 | 15.8 | 2070×2000×1920 |
| PE-600×900 | 600×900 | 500 | 65-160 | 50-180 | 250 | 55 | 17 | 2190×2206×2300 |
| PE-750×1060 | 750×1060 | 630 | 80-140 | 110-320 | 250 | 110 | 29 | 2660×2430×2800 |
| PE-800×1060 | 800×1060 | 640 | 130-190 | 130-330 | 250 | 110 | 29.8 | 2710×2430×2800 |
| PE-830×1060 | 830×1060 | 650 | 160-220 | 150-336 | 250 | 110 | 30.7 | 2740×2430×2800 |
| PE-870×1060 | 870×1060 | 660 | 200-260 | 190-336 | 250 | 110 | 31.5 | 2810×2430×2800 |
| PE-900×1060 | 900×1060 | 685 | 230-290 | 230-390 | 250 | 110 | 33 | 2870×2420×2940 |
| PE-900×1200 | 900×1200 | 750 | 95-165 | 220-450 | 200 | 110 | 52 | 3380×2870×3330 |
| PE-1000×1200 | 1000×1200 | 850 | 195-265 | 315-500 | 200 | 110 | 55 | 3480×2876×3330 |
| PE-1200×1500 | 1200×1500 | 1020 | 150-350 | 400-800 | 180 | 160-220 | 100.9 | 4200×3300×3500 |
| PE-1500×1800 | 1500×1800 | 1200 | 220-350 | 500-1000 | 180 | 280-355 | 122 | 5160×3660×4248 |
| PE-1600×2100 | 1600×2100 | 1500 | 300-400 | 1300-2200 | 160 | 350-380 | 150.6 | 6210×4013×4716 |
| PEX-150×750 | 150×750 | 120 | 18-48 | 8-25 | 320 | 15 | 3.8 | 1200×1530×1060 |
| PEX-250×750 | 250×750 | 210 | 25-60 | 13-35 | 330 | 30 | 5.5 | 1380×1750×1540 |
| PEX-250×1000 | 250×1000 | 210 | 25-60 | 16-52 | 330 | 30 | 7 | 1560×1950×1390 |
| PEX-250×1200 | 250×1200 | 210 | 25-60 | 20-61 | 330 | 37 | 9.7 | 2140×1660×1500 |
| PEX-300×1300 | 300×1300 | 250 | 20-90 | 16-105 | 300 | 55 | 15.6 | 2720×1950×1600 |
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.
){kind=link}