Customization: | Available |
---|---|
Type: | Ball Mill |
Motor Type: | AC Motor |
Still deciding? Get samples of US$ 100000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Ball Mill for Grinding Gold, Copper, Iron, Tin, Manganese, Lead and Aluminum Ores
Wet Ball Mill And Dry Ball Mill for mining grinding
Mine Ball Mills Model:
Overflow Ball Mill:φ 1.5x3.0~ φ8x12m ,Effective volume 7.5~194.3m3
Wet Grate Ball Mill:φ1.2x2.4~φ4x14m,Effective volume 2.2~157m3
Capacity:5-500 tph
ZTIC can produce cylinder diameter below 8m ball mills. The ball mill is mainly used for pulverizing ores and other materials, and widely used for ore dressing, building material, chemical industry and other industries.ZTIC manufacture a full range of Grinding Mills for the Mining Sector.
1.Mine Ball Mill Application:
A ball mill grinds ores and other materials to a typical product size of 35 mesh or finer.
The feed to a ball mill is prepared by...
· Single or multistage crushing and screening
· Crushing, screening, and/or rod milling
· Primary crushing and autogenous/semiautogenous grinding
Mine Ball Mill Normal feed sizes:
· 80% passing 1/4" (6 mm or finer) for hard ores
· 80% passing 1" (25 mm or finer) for softer ores
(Larger feed sizes can be tolerated depending
The length to diameter ratio of cylindrical mills range from 1 to 1 through 3 to 1. When the L/D ratio is 2 to 1 or greater, werefer to the mill as a Tube Mill.
The two most popular types of ball mills are
Grate or Diaphragm Discharge Ball Mill
In the discharge end of this mill, a slotted full diameter or partial diameter grate with discharge lifter assembly conveys the material to the discharge trunnion opening. The grate serves to retain balls, tramp, and coarse material. A gradient created between the feed opening and the discharge slots eases the flow of material.
Trunnion Overflow Discharge Ball mill
A trunnion overflow mill has an open discharge end. Material flows through the trunnion as a result of the pulp gradient between the feed and discharge openings. A reverse helix in the discharge trunnion liner retains balls in the mill.
2.ZTIC Ball Mill Feature
1The cylindrical mill adopts the driving type edge-driving, center-driving, edge-driving with multi-point meshing, etc; driven by asynchronous motor +reducer +pinion and gear as well as synchronous motor +
air l\clutch + pinion and gear.
2Generally supported by static-dynamic pressure bearing on both ends. Fuuly closed self-aligning 120º osculation rocker bearing is used. Also single or double slipper staic- dynamic bearings can be used. The bush is made by NC machine.
3 The large open gear is designed using AGMA standard, Equipped with reliably sealed gear housing and grease ahtomatic spraying lubrication system.
The shell is key part of a mill. Carry out finite element analysis on it with computer to ensure the reliable operation;
4 The shell is automatically welded, ultrasonic inspected, wholly annealed and machined by large special machine tools on one chucking; there special seal on static-dynamic connection parts , ch as feed and discharge hoper, trunnion, etc, to prevent oil and slurry leakage;
5 The liner is of wear-resistance material mad by our company, wich has been specially heat-treated, with high hardness and long service life. Also other wear-resistance casting or rubber liner can be used;
6 There are slow speed drive for medium and large mill;
7The high and low pressure lubricating station is equipped for medium and large mill;
8The control and protection system is controlled by PLC.
1.Main
3.Technical Parameters of Wet Grate Ball Mill:
Model |
Cylinder diameter |
Cylinder length |
Effective volume | Rotate speed | Max. ball loading capacity | Motor | Size (L×W×H) |
Weight |
|
Power | Speed | ||||||||
mm | mm | m3 | r/min | t | kw | r/min | m | t | |
MQS12×24 | 1500 | 3000 | 5 | 26.6 | 9 | 95 | 742 | 6.4×2.9×2.6 | 18 |
MQS15×15 | 1500 | 1500 | 2.3 | 29.2 | 4.8 | 60 | 725 | 5.7×3.2×2.8 | 13.7 |
MQS15×24 | 1500 | 2400 | 3.7 | 29.2 | 7.6 | 90 | 730 | 6.9×3.3×2.8 | 16.5 |
MQS15×30 | 1500 | 3000 | 4.6 | 26.6 | 10 | 90 | 742 | 7.6×3.4×2.8 | 19.5 |
MQS21×30 | 2100 | 3000 | 9.4 | 22.1 | 20 | 220 | 740 | 8.5×4.65×3 | 45 |
MQS24×30 | 2400 | 3000 | 12.2 | 21 | 25 | 250 | 980 | 8.8×4.7×4.4 | 55 |
MQS24×70 | 2400 | 7000 | 26.66 | 21 | 54 | 475 | 740 | 14.3×5.8×4.4 | 67 |
MQS27×21 | 2700 | 2100 | 10.6 | 19.7 | 22 | 280 | 733 | 9.7×6.5×4.8 | 69 |
MQS27×36 | 2700 | 3600 | 18.5 | 20.5 | 39 | 400 | 187.5 | 12×5.8×4 | 74 |
MQS27×40 | 2700 | 4000 | 20.5 | 20.24 | 38 | 400 | 187.5 | 12.4×5.8×4.7 | 77 |
MQS27×60 | 2700 | 6000 | 34.34 | 19.5 | 53 | 630 | 589 | 12×5.7×4.5 | 84 |
MQS29×41 | 2900 | 4100 | 26 | 19.34 | 42 | 450 | 740 | 9.9×6.1×5.1 | 76.1 |
MQS31×64 | 3100 | 6400 | 43.7 | 18.3 | 56 | 1000 | 167 | 15.2×6.98×5.8 | 141 |
MQS32×31 | 3200 | 3100 | 22.65 | 18.3 | 46.9 | 500 | 167 | 13.9×7.3×6.0 | 109 |
MQS32×36 | 3200 | 3600 | 26.3 | 18.3 | 54 | 630 | 167 | 14.3×7.3×6.0 | 116.94 |
MQS32×40 | 3200 | 4000 | 29.2 | 18.2 | 60 | 710 | 980 | 14.7×7.3×6.0 | 121.4 |
MQS32×45 | 3200 | 4500 | 32.9 | 18.3 | 68.5 | 800 | 167 | 15.2×7.3×5.9 | 126.23 |
MQS32×54 | 3200 | 5400 | 39.4 | 18.3 | 81.6 | 1000 | 167 | 16.6×7.3×6.1 | 135.4 |
MQS36×45 | 3600 | 4500 | 41.4 | 17.25 | 86 | 1000 | 167 | 13.5×7.3×6.3 | 153.1 |
MQS36×60 | 3600 | 6000 | 54 | 17.3 | 112 | 1400 | 167 | 15.5×8.3×6.3 | 190.6 |
MQS36×85 | 3600 | 8500 | 79 | 17.4 | 144 | 1800 | 743 | 20×8.2×7.1 | 260.89 |
MQS40×60 | 4000 | 6000 | 69.8 | 16.0 | 126 | 1500 | 200 | 17.4×9.34×7.5 | 215.5 |
MQS40×67 | 4000 | 6700 | 76 | 16.0 | 155 | 1600 | 980 | 16×8.43×7.5 | 235.2 |
MQS40×13.5 | 4000 | 13500 | 157 | 16.5 | 280 | 3300 | 980 | 24.2×9.9×7.8 | 284/375 |
Model |
Cylinder diameter | Cylinder length | Effective volume | Rotate speed | Max. ball loading capacity | Motor | Size (L×W×H) |
Weight |
|
motor | speed | ||||||||
mm | mm | m3 | r/min | t | kw | r/min | m | t | |
MQY15×30 | 1500 | 3000 | 5 | 26.6 | 9 | 95 | 742 | 7.4×3.4×2.8 | 18.5 |
MQY15×36 | 1500 | 3600 | 5.7 | 26.6 | 10.6 | 95 | 742 | 8.0×3.4×2.8 | 17.22 |
MQY18×61 | 1830 | 6100 | 13.4 | 24.5 | 24.6 | 220 | 736 | 10.2×5.1×4.0 | 37.3 |
MQY21×30 | 2100 | 3000 | 9.4 | 22.1 | 15 | 200 | 740 | 8.5×4.65×3 | 45 |
MQY24×30 | 2400 | 3000 | 12.2 | 21 | 22.5 | 250 | 980 | 8.8×4.7×4.4 | 55 |
MQY24×70 | 2400 | 7000 | 26.66 | 21 | 48 | 475 | 740 | 14.3×5.8×4.4 | 67 |
MQY27×36 | 2700 | 3600 | 18.5 | 20.5 | 39 | 400 | 187.5 | 9.8×5.8×4.7 | 61.34 |
MQY27×40 | 2700 | 4000 | 20.5 | 20.24 | 38 | 400 | 187.5 | 10.4×5.8×4.7 | 70 |
MQY27×45 | 2700 | 4500 | 23.5 | 20.5 | 43.5 | 500 | 187.5 | 12.5×5.8×4.7 | 76 |
MQY27×60 | 2700 | 6000 | 34.34 | 19.5 | 53 | 630 | 589 | 13.5×5.9×4.7 | 71.2 |
MQY28×54 | 2800 | 5400 | 30 | 19.5 | 55.2 | 630 | 167 | 13×5.83×4.7 | 97.8 |
MQY28×80 | 2800 | 8000 | 43 | 20 | 78.6 | 800 | 137 | 16.5×7.3×5 | 115 |
MQY30×11 | 3000 | 11000 | 69.2 | 17.3 | 100 | 1250 | 429 | 28.9×3.8×5 | 227.8 |
MQY32×36 | 3200 | 3600 | 26.3 | 18.3 | 48.4 | 500 | 167 | 14.3×7.3×6 | 116.94 |
MQY32×40 | 3200 | 4000 | 29.2 | 18.2 | 60 | 560 | 980 | 16.7×7.3×6 | 121.4 |
MQY32×45 | 3200 | 4500 | 32.9 | 18.3 | 60.5 | 630 | 167 | 13×7.0×5.82 | 124.23 |
MQY32×54 | 3200 | 5400 | 39.4 | 18.3 | 73 | 800 | 167 | 14.2×7.0×5.82 | 129 |
MQY32×64 | 3200 | 6400 | 46.75 | 18.3 | 86 | 1000 | 167 | 15.2×7.0×5.8 | 140 |
MQY32×75 | 3200 | 7500 | 55.5 | 18.3 | 102 | 1250 | 743 | 17.7×8.4×6.3 | 154 |
MQY32×90 | 3200 | 9000 | 64.2 | 18.3 | 106.6 | 1250 | 150 | 18.5.7.3×6 | 173 |
MQY34×45 | 3400 | 4500 | 37 | 18.4 | 74.6 | 800 | 167 | 11.5×7×6.1 | 129.8 |
MQY34×56 | 3400 | 5600 | 45.8 | 17.9 | 84.3 | 1120 | 985 | 16.7×7.6×6.3 | |
MQY36×45 | 3600 | 4500 | 41.4 | 17.25 | 76 | 1000 | 167 | 13×7.3×6.3 | 144.1 |
MQY36×50 | 3600 | 5000 | 46.7 | 17.5 | 85.96 | 1250 | 167 | 15×7.6×6.2 | 150 |
MQY36×50 | 3600 | 5000 | 46.7 | 17.3 | 85.96 | 1250 | 429 | 23×4.6×6.3 | 176 |
MQY36×56 | 3600 | 5600 | 55.4 | 17.76 | 106.3 | 1250 | 750 | 14.4×8×6.3 | 159.7 |
MQY36×60 | 3600 | 6000 | 55.7 | 17.3 | 102.5 | 1250 | 429 | 24×4.6×6.3 | 138.73 |
MQY36×60 | 3600 | 6000 | 54 | 17.3 | 102 | 1250 | 167 | 15.6×8.3×6.3 | 162.7 |
MQY36×61 | 3600 | 6100 | 55.36 | 17.76 | 106.3 | 1200 | 980 | 15.8×8.5×6.2 | 164.1 |
MQY36×85 | 3600 | 8500 | 79 | 17.4 | 131 | 1800 | 743 | 20×8.2×7.1 | 251.89 |
MQY36×90 | 3600 | 9000 | 83.5 | 17.4 | 138 | 1800 | 743 | 28×4.6×5.6 | 286 |
MQY38×67 | 3800 | 6700 | 70 | 16.5 | 130 | 1400 | 743 | 19×8.2×7.1 | 185.2 |
MQY40×60 | 4000 | 6000 | 69.8 | 16.0 | 126 | 1500 | 200 | 17.4×9.5×7.6 | 203.5 |
MQY40×67 | 4000 | 6700 | 78 | 16.0 | 136.3 | 1600 | 200 | 15.6×9.6×7.3 | 206.2 |
MQY40×135 | 4000 | 13500 | 155 | 16 | 233 | 3300 | 200 | 23×10×4.9 | 343 |
MQY43×61 | 4270 | 6100 | 80 | 15.67 | 144 | 1750 | 200 | 14×10×7.7 | 215.3 |
MQY50×64 | 5030 | 6408 | 120 | 14.4 | 251 | 2600 | 200 | 14.6×11×9.1 | 318.5 |
MQY50×83 | 5030 | 8300 | 152.3 | 14.4 | 266 | 3300 | 200 | 22×10.5×9 | 402.6 |
MQY55×65 | 5500 | 6500 | 143.3 | 13.8 | 264 | 3400 | 200 | 18.5×9.8×8.9 | 451.5 |
MQY50×85 | 5500 | 8500 | 187.4 | 13.8 | 335 | 4500 | 200 | 20.5×12×9.8 | |
MQY55×65 | 5500 | 6500 | 143.3 | 13.8 | 264 | 3400 | 200 | ||
MQY50×85 | 5500 | 8500 | 187.4 | 13.7 | 335 | 4500 | 200 | ||
MQY55×88 | 5500 | 8800 | 191.5 | 13.7 | |||||
MQY60×95 | 6700 | 9500 | 249.3 | 13 | |||||
MQY67×116 | 6700 | 11600 | 385 | 12.5 | |||||
MQY73×115 | 7300 | 11500 | 495 | 12 | |||||
MQY80×120 | 8000 | 12000 | 570.5 | 11.5 |
NO |
Model (m) | Production capacity t/h | Speed r/min | Feed in size mm |
medium load t | Effective volume | Main motor | Size | Weight (T) | |||
Power kw | Voltage V | L | W | H | ||||||||
1 | Φ2.2×6.5 | 13-14 | 22 | <25 | 31 | 21.4 | 380 | 6000 | 12385 | 5390 | 4210 | 53 |
2 | Φ2.2×11 | 15-16 | 21 | <25 | 50 | 36 | 630 | 6000 | 21559 | 4540 | 3520 | 109 |
3 | Φ2.2×13 | 16-18 | 21.5 | <25 | 60 | 43 | 630 | 6000 | 26079 | 4540 | 3520 | 114.2 |
4 | Φ2.4×8 | 15 | 20.8 | <25 | 45 | 30 | 560 | 6000 | 17215 | 5564 | 4540 | 82.53 |
5 | Φ2.4×13 | 20-23 | 19 | <25 | 65 | 51.7 | 800 | 6000 | 27580 | 4540 | 3620 | 138 |
6 | Φ2.6×13 | 30-32 | 19.6 | <25 | 80 | 60 | 1000 | 6000 | 20883 | 7740 | 5670 | 144.5 |
7 | Φ3×9 | 28-32 | 17.8 | <25 | 70-80 | 55 | 1000 | 6000 | 23568 | 4760 | 3670 | 138.7 |
8 | Φ3×11 | 36-40 | 18.9 | <25 | 100 | 69 | 1250 | 6000 | 27610 | 5720 | 4080 | 181.9 |
9 | Φ3×11 | 36 | 17.69 | <25 | 100 | 69 | 1250 | 6000 | 24567 | 7510 | 5968 | 156.5 |
10 | Φ3.2×11 | 40-45 | 17.4 | <15 | 90-100 | 78 | 1250 | 6000 | 28000 | 5720 | 3672 | 180 |
11 | Φ3.5×9.5 | 40 | 18 | <20 | 115 | 76.4 | 1400 | 6000 | 29717 | 5250 | 5000 | 194.4 |
12 | Φ3.5×11 | 45 | 17.2 | <15 | 116 | 78.5 | 1600 | 6000 | 28454 | 5350 | 5600 | 271.64 |
13 | Φ3.6×8.5 | 60 | 16.5 | <20 | 102 | 86 | 2500 | 6000 | 19693 | 4141 | 5404.5 | 233.3* |
14 | Φ3.8×9 | 70-80 | 16.5 | <20 | 130 | 94 | 2000 | 6000 | 28521 | 5550 | 5600 | 255.2 |
15 | Φ3.8×12.5 | 55 | 16.4 | <25 | 167 | 123.5 | 2500 | 6000 | 17419 | 10745 | 8204 | 301.4 |
16 | Φ3.8×13 | 60 | 16.3 | <25 | 173 | 128 | 2500 | 6000 | 19693* | 4141* | 5404.5 | 223.3* |
17 | Φ4.2×11 | 120 | 15.75 | ≤3 80%pass | 182 | 134.5 | 2800 | 18500 | 4400 | 6500 | 256** | |
18 | Φ4.2×11.5 | 130 | 15.99 | ≤3 80%pass | 199 | 138 | 2800 | 10000 | 18002 | 8962 | 7520 | 219** |
19 | Φ4.2×11.5 | 130 | 16 | ≤3 80%pass | 199 | 138 | 2800 | 17259 | 4960 | 5600 | 220** | |
20 | Φ4.2×12.5 | 85 | 16 | ≤25 90% | 210 | 151 | 3150 | 18400 | 4960 | 8640 | 251** | |
21 | Φ4.2×12.5 | 145 | 16 | ≤3 80% | 210 | 151 | 3150 | 18400 | 4960 | 8640 | 242** | |
22 | Φ4.2×13 | 75 | 15.6 | ≤25 90% | 209 | 157 | 3150 | 174450 | 4880 | 8000 | 255** | |
23 | Φ4.2×13 | 150 | 15.6 | ≤3 80% | 209 | 157 | 3150 | 17445 | 4880 | 8000 | 256** | |
24 | Φ4.2×13.5 | 80-85 | 15.8 | ≤25 90% | 230 | 164 | 3550 | 17744 | 6700 | 6010 | 256** | |
25 | Φ4.2×14 | 95 | 15.6 | ≤25 90% | 252 | 169 | 3550 | 19055 | 20490 | 23200 | 220** | |
26 | Φ4.2×14.5 | 95 | 15.8 | ≤25 80% | 250 | 178 | 4000 | 5050 | 6700 | 11054 | 278** | |
27 | Φ4.6×14 | 95-110 | 15 | 285 | 185 | 4200 | 6000 | 23200 | 11054 | 6370 | 310** |
Physical & Chemical Identification Center
ZTIC owns a professional testing and metrology institute which provides advanced testing methods such as nondestructive testing, industrial chemical analysis, metallographic testing and analysis, mechanical testing, sample preparation, meter/length measurement, weighing apparatus verification, and weighman inspection. Our metrology institute has taken a leading role in China.
ZTIC owns nearly two hundred types of advanced testing equipment, nine different measurement standards and nearly twenty types of world-class testing equipment which have been imported from international locations such as Germany, Japan, USA, UK and Belgium.
Quality testing equipment
Spectrometer |
Ultrasonic flaw detector |
Carbon and sulfur analyzer |
X-ray detection apparatus |
Brinell microscope |
Leeb hardness tester |
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.