Customization: | Available |
---|---|
Type: | Raw Mill |
Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The raw material ball mill is mainly used for grinding the finished products and raw materials in the cement plant, and it is also suitable for the grinding of various minerals and other abrasive materials in metallurgical, chemical, electric power and other industrial and mining enterprises.It can be used for open stream grinding, and also applied to circle or close flow grinding system with powder selecting machine.
Raw material ball mill has the characteristics of strong adaptability, continuous production, large crushing ratio, easy to adjust the fineness of grinding products and so on.It can be dry produced and wet producted.Also, raw material ball mill can grind and dry simultaneously.
Cement raw materials grinding mills include:
Wet preocess raw material grinding mill
Dry process raw material grinding mill
Technical performance table of main machine of raw material mill:
No. | Spec (m) | Production (t/h) | Mill RPM (r/min) | Feeding size (mm) | Load of grinding media (t) | Effective volume | Production mode |
Drive mode | Main motor | Overall dimension | Device weight (T) | Note | |||
Power (kw) | Voltage (V) | L | W | H | |||||||||||
1 | Φ2.2×6.5 | 15-16 | 22 | <20 | 22 | 18 | Drying | Edge | 320 | 6000 | 12280 | 5390 | 4210 | 52 | |
2 | Φ2.2×8 | 30 | 20.8 | <25 | 45 | Dry method | 560 | 6000 | 17215 | 5564 | 4540 | 81 | |||
3 | Φ2.2×11 | 22-25 | 21 | <25 | 56 | 36 | Wet method | Center | 630 | 6000 | 24080 | 4540 | 3229 | 106 | |
4 | Φ2.2×11 | 22-25 | 21.5 | <25 | 40~45 | 43 | Edge | 500 | 6000 | 20020 | 6512 | 4960 | 105 | ||
5 | Φ2.2×13 | 29-30 | 21.5 | <25 | 60 | 43 | Center |
630 | 6000 | 26183 | 4540 | 3229 | 118.4 | ||
6 | Φ2.2×13 | 24-25 | 21.5 | <25 | 60 | 43 | Dry method | 630 | 6000 | 26079 | 4540 | 3520 | 113 | ||
7 | Φ2.2×13 | 40-46 | 19 | <25 | 65 | 50 | Wet method | 800 | 6000 | 27540 | 4540 | 3415 | 134 | ||
8 | Φ2.2×13 | 40 | 18.9 | <25 | 65 | 50 | Dry method | 800 | 6000 | 27345 | 6040 | 3620 | 145 | ||
9 | Φ2.6×13 | 43-50 | 19.4 | ≤20 | 80 | 60 | Wet method | Edge | 1000 | 10000 | 20973 | 5616 | 5675 | 152.3 | |
10 | Φ2.6×13 | 43-50 | 19.4 | ≤20 | 80 | 60 | 1000 | 10000 | 20973 | 6507 | 5675 | 153 | |||
11 | Φ3×9 | 36-42 | 17.8 | <15 | 70-80 | Dry method | 1000 | 6000 | 23285 | 5965 | 3878 | 136.6 | |||
12 | Φ3×11 | 60-65 | 17.4 | <25 | 90-100 | 69 | Center | 1250 | 6000 | 28000 | 5720 | 3672 | 180 | ||
13 | Φ3×12 | 55-58 | 17.7 | <20 | 95-100 | 76 | Wet method | 1250 | 6000 | 30800 | 5720 | 3900 | 198.6 | ||
14 | Φ3.2×7 1.8 | 48-53 | 18 | <20 | 55-58 | 44.5 | Drying | 1000 | 6000 | 24700 | 5120 | 4230 | 167.5 | ||
15 | Φ3.2×10 | 55 | 17.83 | <20 | 65 | 44.5 | 1000 | 6000 | Removing the middle | 5300 | 186.9 | Middle unloading | |||
16 | Φ3.4×7 1.8 | 54 | 16.9 | <20 | 65 | 51.5 | 1000 | 6000 | 22075 a | 5120 | 4230 | 184.4 | Motor length | ||
17 | Φ3.4×7.5 1.8 | ~60 | 16.9 | <20 | 70 | 54.58 | 1250 | 6000 | 27180 | 5720 | 4230 | 214~217.5 | |||
18 | Φ3.5×10 | 75 | 16.69 | <20 | 80 | 64.6 | 1250 | 6000 | 25382 | 5802 | 4830 | 170 | Middle unloading | ||
19 | Φ3.8×9 | 90-95 | 16.5 | <15 | 130 | 94 | 2000 | 6000 | 28521 | 550 | 5600 | 256.3 | |||
20 | Φ3.8×8.5 3.5 | ~90 | 16.5 | <20 | 100 | 89.4 | 1600 | 6000 | 32504 | 6770 | 6030 | 305.6 | |||
21 | Φ4.6×8.5 3.5 | 150 | 15 | <20 | 150 | 89.4 | 2800 | 21739 | 6990 | 9000 | 310.7 | ||||
22 | Φ4.6×10 3.5 | 190 | 15 | <25 | 190 | 157 | 3500 | 23599 | 6900 | 4630 | 352** | ||||
23 | Φ4.6×9.5 3.5 | 185 | 15.2 | <25* | 175-180 | 148 | 3550 | 6000 | 22939 | 5239 | 7550 | 298** | |||
24 | Φ4.6×14 | 185-220 | 15 | 210 | 185 | Dry method | Edge | 4200 | 23200 | 11934 | 6370 | 310** | end unloading | ||
* 95% through; ** does not include transmission and grinding weight. |
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS