Ztic Oxidized Pellet Rotary Kiln Parts Kiln Shell

Product Description

ZTIC Oxidized Pellet Rotary Kiln Parts Kiln Shell

Product Description

In mine equipment, the ball mill is one of the necessary equipment, and the ball mill is one of the main working parts of the ball mill. Ball mill barrel in the work, in addition to receiving the static load of the grinding media, but also by the impact of grinding media, and the cylinder is a rotating, so the stress generated on the cylinder is changed. The metal material of the cylinder body is of high strength and good plasticity, and can be welded with common structural steel Q235, and the cylinder of the large mill is made of 16Mn steel.
Every bin on the cylinder should have a grinding door (also known as Kong Men). Grinding door is convenient for personnel to enter, inserts for lining board, partition board, filled or emptied grinding media, and stop grinding mill inspection operation. The position of each bin should be staggered on both sides of the cylinder, and the centrifugal force generated by the gravity of the grinding gate. In order to ensure the strength of the cylinder, the shape of the grinding door is generally round, oval or round shape, so as to avoid the crack caused by the stress concentration and cause the damage of the cylinder.
Mill operation and stopped for a long time when the length of the cylinder is not the same, this is due to the different barrel temperature caused by thermal expansion and contraction caused by. In order to ensure that the gear meshing normally, near the mill transmission device of unloading terminals are not allowed to have any axial movement, therefore, to be in the feed end set to adapt to the axial thermal deformation of the structure: A is reserved clearance between shaft neck of hollow shaft shoulder and bearing; another is the bearing seat and between the floor horizontal mounting a plurality of steel and, when heat expansion and cold contraction of a cylinder body, feed end of main bearing base along the roller moving.

Product Parameters

1. Oxidation pellet rotary kiln product parameters

No.

Model

Figure number

SPEC

Drive

Support

Thrust Roller form

Tyre (max)Φ×b(m)(t)

big gear ring m Φ×(m)G(t)

Weight (t)

Slope  (%)

Rev (r/min)

Production capacity   Ten thousand tons t/a (t/h)

Type

Machine

Multipoint hydraulic type

Block number

Bearings type

Motor  (kW )

Reducing gear

hydraulic pressure points

Rpm kNm

1

Φ4.0×30m

J973A

3.5

0.47~1.4

60 (90)

One side mechanical drive

ZSN4-315-092 190KW

ZSY630 Velocity ratio:63

2

roll

Single hydraulic gear

Φ4.81×0.65/0.692 G=22.5

m=28 Φ6.16×0.4 G=11.74

329

2

Φ5.0×33m

J987

4.36

0.95 max1.27

110 (152)

One side flexible drive

YZP400L2-6 330KW

ZSY630 Velocity ratio:40

One   side two points

144

2

roll

Double hydraulic gear

Φ6.1×0.766/0.85 G=50

m=32 Φ7.296×0.7 G=38

646

3

Φ5.0×35m

J987A

4.25

0.3~1.3

120 (165)

One side hydraulic drive

Two  sides four points

82.5×4

2

roll

Single hydraulic gear

Φ6.1×0.76/0.87 G=47.7

m=36 Φ7.343×0.6 G=37.7

635

4

Φ5.9×38m

J991

4.25

0.5~1.5

200 (268)

Two sides hydraulic drive

Two  sides four points

87.5×4

2

roll

Single hydraulic gear

Φ7.2×0.96/1.0 G=81.46

m=40 Φ8.8×0.68 G=46.4

960

5

Φ6.1×40m

J992

4.25

0.45~1.35

220 (305)

Two sides hydraulic drive

2

roll

Single hydraulic gear

Φ7.4×0.96/1.0 G=83.9

m=40 Φ9.04×0.68 G=51.5

988

6

Φ6.4×45m

4.25

0.45~1.5

240 (333)

Two sides machine drive

YP2-450L2-6 400×2

ZSY800 velocity ratio:63

2

roll

Single hydraulic gear

Φ7.4×0.96/1.0 G=83.9

m=40 Φ9.04×0.68 G=51.5

1084

Company Profile

ZTIC began in 1956-The  largest mining equipment and cement equipment manufacturers in China.ZTIC is a global supplier of technology and services to customers in the process industries,including
Mining,Construction,Metallurgical,Environmental,Power,Chemical,Marine,Casting&Forgings. 
ZTIC produces over 200,000 tons of quality equipment annually. Our products include grinding mills, scrubbers,crushers, kilns, coolers, hoists, reducers, steam turbines and compressors. ZTIC also manufactures heavy castings and forgings, as well as electric/hydraulic control and lubrication systems.
Our factory in Luoyang covers more than 3 million square meters, of which 2 million square meters is under cover. It has a total workforce of approximately 10,000 employees of which more than 1,200 are engineers.
ZTIC produces over 200,000 tons of quality equipment annually. Our products include grinding mills, scrubbers,crushers, kilns, coolers, hoists, reducers, steam turbines and compressors. ZTIC also manufactures heavy castings and forgings, as well as electric/hydraulic control and lubrication systems Etc.

FAQ

Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
     2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
     3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
 
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
 
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
 
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
 
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
 

After Sales Service

ZTIC  is your business partner in the After Market.
ZTIC  able to provide:
1.    ENGINEERED SPARES -  DESIGN AND MANUFACTURING
2.    LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3.    HUGE MACHINE SHOP CAPABILITIES
4.    TRAINING PROGRAMMES
5.    PREVENTATIVE MAINTENANCE PROGRAMS
6.    PREVETATIVE MAINTENANCE SERVICES
7.    COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.