| Customization: | Available |
|---|---|
| Type: | Flotation Separator |
| Voltage: | Sf Flotation Machine |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The series Flotation Machine is mainly used for dressing below 0.5mm coal slime, as well as nonferrous metal, rare metal, black metal and nonmetal particle minerals.
The flotation machine is suitable for the separation of non-ferrous and ferrous metals, and can also be used for the separation of non-metals such as coal, fluorite and talc.
The flotation machine has the following features: large air intake and low power consumption.
Each slot has the triple functions of suction, slurry suction and flotation, forming its own flotation circuit without any auxiliary equipment. The configuration is horizontal, facilitating process changes.
The flotation machine adopts a "U" -shaped tank, hollow shaft aeration and suspended stator, especially a new type of impeller. This is a conical impeller with blades inclined backward at an Angle, similar to the impeller of a centrifugal pump with a high specific speed. It features a large slurry lifting capacity, a small head, low power consumption and a simple structure. A multi-hole cylindrical air distributor is also installed in the impeller cavity, enabling the air to be pre-evenly dispersed in most areas of the impeller blades and providing a larger slurry-air contact interface.
The working principle of the flotation machine
When the flotation machine is in operation, as the impeller rotates, the pulp in the tank is drawn from the periphery through the bottom of the tank from the lower end of the impeller to the space between the impeller blades. Meanwhile, the low-pressure air fed in by the blower also enters through the hollow shaft and the air distributor of the impeller. After the pulp and air are fully mixed between the blades, they are pushed obliquely upward from the periphery of the upper half of the impeller. After being stabilized and directed by the stator, they enter the entire trough. The bubbles rise to the foam stabilization zone. After the enrichment process, the foam overflows by gravity from the overflow weir and enters the foam trough. Another part of the pulp flows towards the lower part of the impeller. After being stirred by the impeller, it is re-mixed to form mineralized bubbles. The remaining pulp flows to the next tank until it eventually becomes tailings.
The use and maintenance of flotation machines
1.The working capacity and working time of the flotation machine, like those of other machines, are determined by maintenance and the main parts of all 3-4 months of normal operation have been carefully inspected. However, during the first few months of the operation of a new flotation machine, frequent inspections should be carried out.
2.Only skilled personnel can conduct the inspection.
3. To ensure that vulnerable parts are replaced in a timely manner and reduce downtime, we must always keep a complete set of parts in the warehouse. The usage date and reserve quantity of vulnerable parts should be determined based on different circumstances.
4. It is necessary to ensure that the operators of the flotation machine receive some technical guidance and training to make them fully familiar with the machine.
SF Flotation Machine Technical data:
Model |
SF0.37 |
SF0.7 |
SF1.2 |
SF2.8 |
SF4 |
SF8 |
|
Trough capacity(m³) |
0.37 |
0.7 |
1.2 |
2.8 |
4 |
8 |
|
Impeller diameter(mm) |
300 |
350 |
450 |
550 |
650 |
T60 |
|
Production capacity (m³/min) |
0.2-0.4 |
0.3-0.9 |
0.6-1.2 |
1.5-3.5 |
0.5-4 |
4-8 |
|
Impeller rotation speed (r/min) |
352 |
400 |
312 |
268 |
238 |
191 |
|
Motor |
Model |
Y90L-4 |
Y100L2-4 |
Y132M2-6 |
Y160L-6 |
Y180L-6 |
Y250M-8 |
Y90S-4 |
Y90S-4 |
Y90S-4 |
Y90S-4 |
Y90L-4 |
Y100L-6 |
||
Power(kw) |
1.5 |
3 |
5.5 |
11 |
15 |
30 |
|
1.1 |
1.1 |
1.1 |
1.1 |
1.5 |
1.5 |
||
Dimensions(mm) |
700×700×750 |
900×820×950 |
1100×1100×1100 |
1700×1600×1150 |
1850×2050×1200 |
2200×2900×1400 |
|
Single trough weight(kg) |
468 |
600 |
1373 |
2338 |
2660 |
4486 |
|
Model |
XJM-1 | XJM-2 | XJM-3 | XJM-4 | XJM-8 | XJM-16 | XJM-24 | XJM-38 | |
| Chute dimensions | Length (mm) | 1000 | 1300 | 1600 | 1800 | 2200 | 2800 | 3100 | 3600 |
| Width (mm) | 1000 | 1300 | 1600 | 1800 | 2200 | 2800 | 3100 | 3600 | |
| Height (mm) | 1100 | 1250 | 1400 | 1500 | 1950 | 2400 | 10819 | 3400 | |
| Single effective weight (kg) | 1154 | 1659 | 2259 | 2669 | 3868 | 6520 | 8000 | 16790 | |
| Effective cubage (m³) | 1 | 2 | 3 | 4 | 8 | 16 | 24 | 38 | |
| Production capacity(calculated by slurry volume) (m³/min) | 0.2-1 | 0.4-2 | 0.6-3 | 1.2-4 | 3-8 | 4-16 | 4-24 | 10-38 | |
| Main shaft motor | Model | Y132M2-6 | Y160M-6 | Y160L-6 | Y180L-6 | Y200L2-6 | Y280S-8 | Y280S-8 | Y280S-6 |
| Power (kw) | 5.5 | 7.5 | 11 | 15 | 22 | 37 | 37 | 45 | |
| Impeller | |||||||||
| Rotation speed (r/min) | 960 | 970 | 970 | 970 | 970 | 740 | 740 | 980 | |
| Diameter (mm) | 400 | 460 | 540 | 620 | 720 | 860 | 950 | - | |
| Height (mm) | 155 | 175 | 207 | 247 | 321 | 349 | - | - | |
| Rotation speed (r/min) | 358 | 331 | 266 | 215 | 185 | 160 | 153 | - | |
| Circular velocity (m/s) | 7.5 | 7.5 | 7.5 | 7 | 6.97 | 7.6 | 7.6 | 7.4 | |
| Loam board motor | Model | Y90S-4 | Y90S-4 | Y90L-4 | Y90L-4 | Y90L-4 | Y90L-4 | Y90L-4 | Y90L-4 |
| Power (kw) | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Rotation speed (r/min) | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | |
| Loam board | Rotation speed (r/min) | 18 | 18 | 16 | 16 | 16 | 16 | 16 | 16 |
| Diameter (mm) | 500 | 500 | 580 | 600 | 600 | 700 | 700 | 700 | |
| Wind pressure of fan (kpa) | ≥12.6 | ≥14.7 | ≥19.8 | ≥19.8 | ≥21.6 | ≥25.5 | ≥30.4 | ≥34.3 | |
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
){kind=link}