Stone Tooth Double Roller Roll Crusher
Product Description
Tooth Roller Crusher
Supply Ability:50 Set/Sets per Month
Production capacity:80-4000 t/h
Port:Qingdao,Tianjin, Shanghai or others
Feature:simple structure, takes up smaller space
ZTIC can design and produce 300t/h-3000t/h double roller crushers. The series product is non-standard crusher developed for oil shale, featured by large processing capacity, compact structure, light weight, little loss, strong material adaptability, and is the first choice for crushing granular materials. The service life of gear roller is 3-5 years, 5-10 times of common gear roller.Double roll crusher (sieving crusher) as the independent development of products, with independent intellectual property rights, as the host of the crushing station, accounts for 100% of the domestic open coal crushing plant market in China.
PG double toothed roll crusher is mainly used in coal crushing large pieces of raw coal, also can be used in other industries, such as metallurgy, building materials, electricity) broken is less than 200 mpa compressive strength of brittle materials. Tooth plate of main characteristic this machine is made of wear resistant high strength alloy material, and greatly increase the service life of crusher. Native quenching of main shaft adopts advanced technology, improve the degree of main shaft strength, stiffness and wear resistance.
Roller Crusher
The roller crusher has widely application in the industries of mining, building materials, chemical industry, metallurgy, etc. The roller crusher can do secondary and fine crushing of materials with middle hardness or middle hardness, such as mineral, rocks, coke, coal, slag, scoria, and fire-proof material, etc.
The values in this table represent a typical sizer and are dependent on the tonnage rate and tooth configuration required.
Our Advantages
Product advantage:
1. Gear roller shaft, gear crown and grid plate adopt inner passage water-cooling system with outstanding cooling effect (the gear crown temperature is 60°C after being off for 10 min ) to increase the life time of the gear roller and the grid plate.
2. The retarder adopts fully sealed gearbox structure with low operation noise and no oil leakage.
3. Fully sealed rolling bearing to provide easy maintenance and lower maintenance cost.
4. The screw tooth roller to increase the breaker life time for 1-2 times.
5. The tooth plate is fixed on the hub for easy replacement and save the time and energy.
6. The tooth plate is made of alloy steel and the wearing-resistant layer is formed on the surface to guarantee 40000 h life time.
7. Safe sleeve shaft is provided at the tooth roller drive end. The breaker can stop in case of abnormality, such as overload to protect the equipment.
Applicable scope
1. Coarse breaking for the metallurgy sinter mine in the working temperature of lower than 900°C in the steel manufacturer.
2. Coarse breaking and intermediate breaking of hard brittle materials with breaking pressure lower than 20kN/cm2 in the concentration plant, stone plant and power generation plant.
Principle structure of toothed single roll crusher
Toothed single roll crusher is consisted of rotary roller with large tooth and adjustable crushing plate. The material is smashed, pressed or rumpled in the single-tooth roll breaker. When the materials enter into the breaking cavity from top of the hopper, the material is brought into the breaking cavity between the tooth roller and crushing plate by the rotary roller for breaking. The crushed materials will be discharged by the self-gravity from the discharging port. The clearance between the crushing plate and the tooth roller can be adjusted to control the particle size of the crushed materials.
Features
Sizing Chamb
Modular Ribbed Robust Mainframe
er lined with easy to replace wearplates
Suitable holes predrilled to readily accept hopper or chute work
High strength alloy steel shafts
Replaceable wear part design, sizer teeth can be replaced quickly.
Unique tooth designs to allow maximum utilization of the materials.
Grease lubricated bearings usually fed by automated system
Steps taken to prevent ingress of dirt to bearings
Fluid Coupling - Allows loaded startup and affords torque protection to the machine
Shock loading resistant - Robust modular gearbox with high torque capacity
Stall / Non-Start Detection
Product Parameters
2PGC Roller Crusher Technical data:
Model |
Roller diameter mm |
Capacity t/h |
Broken materials |
feeding size mm |
Discharging size mm |
| 2PGC-1630 |
Φ1630 |
2350 |
Raw coal |
0-1800 |
0-300 |
| 2PGC-1370A |
Φ1370 |
2000 |
stone,coal |
0-1500 |
0-300 |
| 2PGC-1370B |
Φ1370 |
2000 |
limestone |
0-1500 |
0-300 |
| 2PGC-1270 |
Φ1270 |
1200 |
Raw coal |
0-1200 |
0-300 |
| 2PGC-980 |
Φ980 |
500 |
coal |
0-1000 |
0-200 |
| 2PGC-600 |
Φ600 |
100 |
limestone |
0-300 |
0-100 |
| 2PGC-550 |
Φ550 |
80 |
coal |
0-300 |
0-50 |
| 2PGCF-820 |
Φ820 |
2000 |
Raw coal |
0-330 |
0-50 |
Company Profile
FAQ
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Guarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
After Sales Service
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.
Audited Supplier 
){kind=link}
){kind=link}