| Customization: | Available |
|---|---|
| After-sales Service: | on Line 24 Hours |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CITICIC Sponge Iron rotary Kiln technical characteristics:
♦ Kiln body is made of high quality composed of carbon steel or alloy steel plate and automatic welding;
♦ Tyre,Support Roller,Open gear adopts alloy cast steel;
♦ Sliding bearing with large gap not scraping tile bearing;
♦ Transmission device adopts hard tooth surface reducer, flexible diaphragm coupling, dc motor;
♦ Adopts hydraulic gear wheel;
♦ Preheater scales were used respectively to veiw of kiln head, and cylinder pressure tight seal;
♦ A slow drive device.
Sponge Iron rotary Kiln features
The coal based rotary kiln process of making sponge iron is the focus of the present write up. Although many different processes and process concepts have been emerging in this area, there were rapid births and deaths of these processes and process concepts in the middle of the twentieth century. But those operating successfully at present have many
features in common. Some of the common or slightly differing features are:
(i) System of sealing to prevent air ingressinto the reactor,
(ii) System of throwing or slinging coal from discharge end of reactor,
(iii) System of weigh feeding and proportioning of raw materials
(iv) System of introducing controlled amount of air at regular intervals of length in such a way that it does not
oxidise the reduced product in the bed,
(v) System of temperature sensing at regular intervals of length of the reactor and recording of the same.
(vi) System of indirect cooling of sponge iron-char mixture in a rotary steel cylindrical shell using water from the
outside.
(vii) System of treating waste gases and maintaining desired flow profile through pressure control.
Technical parameters of Magnesium oxide rotary kiln:
| Model (m) | Production Capacity (t/d) | Host Machine | Speed Reducer | Weight (t) | Remark | ||
| Model | Power(kw) | Model | Ratio | ||||
| φ18x26 | 72 | JZT2-72-4 | 30 | JZQ750-1- | 48.57 | 66 | |
| φ1.9/1.6x39 | 72 | JZT2-72-4 | 30 | JZQ750-1- | 48.57 | 66 | |
| φ1.9x36 | 84 | YCT315-4A | 37 | ZS110-5- | 78.19 | 85.9 | |
| φ2.2x45 | 98.4 | JZT82-6 | 55 | ZA125 | 93.93 | 104 | |
| φ2.5x40 | 160 | Z2--92 | 40 | ZS125-2- | 134.9 | 143 | |
| φ2.5x45 | 170 | JTZ82-4 | 45 | ZS125-4- | 69.71 | 148 | |
| φ2.5x50 | 180 | ZT3-72-4 | 30 | ZS145-9-V | 122.8 | 173 | |
| φ2.5x60 | 168 | YCT355-4B | 75 | ZS165-7- | 99.96 | 222 | Bauxite calcining kiln |
| φ3x48 | 360-480 | YCT355-4B | 75 | ZS145-7- | 100.4 | 170.6 | |
| φ3.1/2.5x78 | 216-240 | Z4-225-31 | 75 | ZS165-2- | 57.17 | 268 | |
| φ3x48 | 700 | ZSN4-280-21B | 110 | MSY56-28- | 28 | 244 | decomposition out the kiln |
| φ3x100.94 | 450 | ZSN4-280-21B | 90 | NZS995-90-VI-L | 90 | 526 | more cooling tube |
| φ3.2x50 | 1000 | ZSN4-280-21B | 160 | MSY56-28- | 28 | 252.4 | decomposition out the kiln |
| φ3.2x52 | 600 | ZSN4-280-21B | 125 | ZSY1110-71BL | 71.54 | 275 | Preheater kiln |
| φ3.3x52 | 1000 | ZSN4-280-11B | 125 | NZS995-40-VI-BR | 40 | 283 | decomposition out the kiln |
| φ3.5x52.5 | 1400 | Z2-112 | 180 | ZS177 | 79.22 | 360 | decomposition out the kiln |
| φ3.5x54 | 1500 | ZSN4-3156-092 | 220 | ZSY500-40-V | 40 | 368 | decomposition out the kiln |
| φ3.6x70 | 490 | ZSN4-280-11B | 125 | ZS177-5- | 79.2 | 419 | Waste heat power generation kiln |
| φ3.95x56 | 2000 | Z4-280-32BTH | 250 | ZSY560-40- | 40 | 417 | decomposition out the kiln |
| Φ4x28 | 90 | ZSN4-280-21B | 160 | ZSY500-71-IV | 71 | 300 | |
| φ4x60m | 2500 | ZSN4-355-09Z | 315 | ZSY630-35.5- | 34.6 | 523 | decomposition out the kiln |
| φ4.2x60m | 2800 | ZSN4-355-12 | 420 | ZSY710-35.5- | 35.5 | --- | decomposition out the kiln |
| φ4.3x60m | 3000 | ZSN4-355-12 | 375 | ZSY710-40 | 40 | 553 | decomposition out the kiln |
| φ4.8x75m | 5000 | ZSN4-400-92 | 630 | JH710-40 | 42 | 841 | decomposition out the kiln |
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
Q:Delivery time:
A: Parts lead time 1-2months, machines 2-3months.
Q:Payment terms:
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping.
Q: Quality warranty?
A: Quarantee time: one year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC's Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.
){kind=link}